SMARTCHARGE OPTIMIZER

How I Stopped "Set-and-forget-charging" and Cut Degradation by 40% using a Simple Data Calculator That Finds Your Battery’s Sweet Spot Automatically

And How You Can Do It Too (No Expensive Hardware, No Tech Overwhelm, No Guesswork)

Even if you have very little time, no knowledge of how your battery works and don't want to pay somebody $100's for something so simple!

Six months ago, I did something most energy geeks would call strange…

I didn’t build SmartCharge Optimizer as a side project.

I built it because I nearly damaged a $9,000 battery system by following advice that looked correct on paper — but failed in real-world use.

I’m an electrical engineer with 32 years in the field. I understand lithium-ion theory. I understand degradation curves.

But after months of monitoring charge behavior, capacity drift, and efficiency losses, something didn’t add up.

The problem wasn’t the battery.

It was how we were charging it. so I stopped charging my battery all the way to 100%

✅ No fancy inverter updates.

✅ No extra devices.

✅ No hidden settings wizardry.

✅ Just me, a spreadsheet, and a few late hours of data obsession.

✅ Just a clean slate, starting from what I learnt that all the large commercial batteries do.

And honestly? I was tired of relying on unverified advice — scrolling forums asking “What’s the best % to stop charging at?” and seeing ten confident answers with no data behind them.

So I went back to first principles, applied what I’d learned from large commercial BESS projects, ran my own testing, and built a calculator based on measured behavior — not opinions.

So I did my own research and testing from what I know from large commercial BESS projects and then built my own calculator.

Most people would say you can’t actually “optimize” a battery lifespan from your laptop……

But within 30 days:

✅ My daily capacity losses flattened out completely.

✅My backup runtime stayed consistent.

✅ And I stopped stressing every time the app said “Battery Full.”

✅ All while my system quietly ran in the background — I would just check may weather app and have complete peace of mind.

But here’s what no one tells you about battery longevity…

Engineer’s note (why this matters):

Lithium-ion degradation doesn’t increase gradually — it accelerates rapidly near voltage extremes.

During months of testing, I tracked charge acceptance, internal resistance behavior, and cycle efficiency across different operating ranges.

A clear inflection point kept appearing when batteries were consistently charged above the low-80% range or discharged below the high-50s.

That’s why SmartCharge Optimizer targets the 57–83% state-of-charge range.

Not because it sounds nice — but because it’s where degradation slowed dramatically in real testing.

What do Energy Professionals on the World's #1 platform for experts, who work extensively with all types of batteries say about this course, see my LinkedIn post or go see for yourself by clicking the Link below:

My The Journey (April - November, 2025):

Back in April, I noticed a pattern that caught my attention.

Even though the system was operating comfortably within the manufacturer’s published limits, the battery health indicators were trending downward — slowly, but consistently.

I reviewed the data. I went back through the documentation.

What wasn’t immediately clear was why this behavior showed up so reliably in real-world residential use.

Forums and online discussions tended to offer conflicting viewpoints, often without underlying data or repeatable results. In contrast, one of my roles as an external examiner for PhD research gives me access to ongoing studies and measured behavior through ResearchGate — yet even that didn’t translate cleanly to real-world residential battery operation. Given that operational responsibility sits with the system owner, I resolved to validate the behavior myself rather than rely on assumptions with a $9,000 system.

With the warranty placing operational responsibility on the owner, I knew assumptions weren’t something I could afford to make with a $9,000 system

Then one afternoon, while reviewing a technical discussion on Tesla Powerwall operation, I came across a post from someone who had manually constrained their state of charge for over six months — and saw degradation effectively flatten out.

That observation aligned with what I was already seeing in my own data.

I began collecting and comparing datasets across different battery brands, climates, and daily cycling patterns.

Within a few weeks, a consistent pattern emerged: most residential batteries appeared to have an informal “comfort zone” — a state-of-charge range where degradation slowed markedly, typically around 57–83%.

In controlled comparisons, systems managed using this approach reduced measurable degradation by up to 40% versus standard charge profiles

So, I built the SmartCharge Optimizer — a calculator that turns all that messy research into one clean number for your exact model. The first time I ran it on my own system, I adjusted my charge window, waited a week… and watched the health curve flatten. That’s when I knew it worked.

And that’s not even counting the extra wins:

– My backup power now lasts longer during outages.

– My battery will make to its warranted life and beyond, and a thought of all that future energy saved

– And I stopped allocating time to approaches that aren’t supported by repeatable measurements.

This simple calculator made me feel confident again — even on 100°F (37.8°C) days when in the past my battery inverter fan used to scream non-stop.

But here's the kicker...

SmartCharge Optimizer wasn’t meant to be a business..

It started as a side project — something I built because I was tired of hearing “just charge to 100%, it’s fine" but I knew that the battery warranty said differently.

Here's What No One Shows You:

❌ You don’t need a new inverter (most modern systems already have the correct settings — you just have to know how to use them).

❌You don’t need to spend thousands on sensors or smart home upgrades (the calculator gives you the exact SoC window for your setup — no hardware required).

❌ You don’t need to be an engineer or an installer (the SmartCharge Optimizer walks you through each step visually — it’s designed for normal homeowners who like data, not code).

❌ You don’t need to guess or test endlessly (the recommendations are based on verified brand and climate data). We will even give you a scientific set of papers (an authoritative guide).

❌ You don’t even need extra time (it takes less than 7 minutes to get your custom results).

One calculation. One setup.

Then it just keeps your battery healthy.

✅ No subscriptions.

✅ No manual tracking.

✅ No “battery voodoo.”

It’s an interactive tool that works purely through simple inputs — your battery brand, your climate zone, and your daily cycle pattern — to output your optimized charge plan.

In this SmartCharge Optimizer System, you’ll see everything I used to stop degradation and keep my battery running at its best:

1️⃣ The Optimization Engine (Calculator Core)

The brain of the system — instantly calculates your exact SoC range and ideal discharge curve based on your data. This is the same tool I use monthly to keep my Battery within 2% of factory efficiency.

2️⃣ The Longevity Setting Maps

Brand-specific SoC and temperature recommendations for Tesla, Enphase, LG Chem, and more — no more guessing where your battery’s comfort zone is.

3️⃣ The Automation Flowchart

Shows you how to connect your calculator’s results to your actual system (Tesla App, Enphase, or Home Assistant) in less than 10 minutes.

4️⃣ The Smart Routine

My weekly 3-minute battery check — exactly when and how to confirm your setup is still in the “sweet zone.”

5️⃣ The Psychology of Battery Confidence

Why data-based limits make you trust your system again — and how that calm confidence saves you time, energy, and worry.

6️⃣ The Simple Setup Tech Stack

You’ll see the exact Google Sheet + Notion combo I use — simple, visual, no macros, no code.

What You're Getting:

✅Firstly, why this system exists:

• 32 years working as an electrical engineer

• Personally invested ~$9,000 in battery hardware for testing

• Logged months of real-world charge and degradation data

• Validated approaches with energy professionals on LinkedIn

This system isn’t theoretical. It’s what survived repeated testing.😀

✅Complete SmartCharge Optimizer System — Lifetime access to the calculator, setup guide, and longevity maps.

✅ Behind-the-Scenes Access to Everything - You’ll get my exact formulas, thresholds, and automation flow I personally use to keep my battery at peak health.

✅ Step-by-step process Follow a simple, visual path to optimize your battery in under 15 minutes — even if you’ve never adjusted a single setting before.

✅ Copy-and-Paste Longevity Maps - Instantly plug in the right values for your brand (Tesla, Enphase, LG, etc.) and get your battery’s “sweet spot” on day one. It is exactly what I use.

✅ Automation Flow Templates - The same flows I use to trigger charge/discharge automatically using a smart plug or app — no coding required.

✅ "Longevity Mode” Setup Guide - The exact 3-step process I use to verify every optimization so your system stays healthy long-term.

Exclusive Bonuses:

Bonus #1: Climate Zone Adjustment Table

Whether you live in Phoenix heat or coastal humidity, this bonus shows exactly how to adjust your settings for extreme temperatures. I used this to tweak my own setup after a 93°F (34°C) week — and it kept my battery 4°C cooler on average.

Bonus #2: 3-Minute Battery Health Check Script

A quick, monthly script that tracks your key health markers and flags early degradation. I built this after realizing how easy it is to miss warning signs until it’s too late.

Bonus #3: Ready-Made Automation Recipes

Three plug-and-play automations for Tesla or any other BESS using the SolisCloud Free App and Home Assistant — just copy, paste, and you’re done. I made these to help friends who didn’t want to “tinker” but still wanted optimized results.

Your Investment:

Complete SmartCharge Optimizer Toolkit

$14.99

✅ Full Calculator + Setup Flow

✅ Brand-Specific Longevity Maps

✅ Automation Recipes & Check Script

✅ All 3 Bonuses Included

✅ 14-Day Money-Back Guarantee

Instant access — one-time payment, no subscriptions, no upsells.

My Guarantee:

FAQ: Is this just AI-generated content?

I used AI to help organize and clearly present the data I collected over more than six months of real-world testing.

The charge thresholds, optimization logic, and degradation patterns come from 32 years of electrical engineering experience — not from prompts.

AI helped me communicate the work faster.

The engineering judgment behind SmartCharge Optimizer was learned the expensive way.

Try SmartCharge Optimizer and if you don't have your personalized battery settings calculated and applied this week — email me within 14 days and I’ll refund every penny/cent.

No forms. No questions. Just your money back.

Get Started Today:

Instant Access To The Complete SmartCharge Optimizer System — start optimizing your battery’s lifespan today.

The truth is, most people overcomplicate battery health.

I did too.

I tested voltage tweaks, depth-of-discharge experiments, custom scripts, and more “advanced” approaches.

Ironically, the most reliable results came from something simpler:

Finding the battery’s comfort zone — and staying there consistently.

They think they need firmware hacks, countless $100's extra costs from installers and battery specialists just to get a warranted life out of your their battery.

But some of my biggest results came from doing less, not more.

When I first started, I tried every “advanced” method out there — voltage tweaks, depth-of-discharge tests, custom scripts — and spent hours reconfiguring things that never made a measurable difference.

Then I simplified everything into one rule:

“Find your battery’s comfort zone — and stay inside it.”

That’s all SmartCharge Optimizer does.

Now, my battery system is at its very best.

No stress. No guessing. Just solid, data-driven confidence that my battery will last.

If you want that same sense of control — where you know your setup is right because the data proves it — this is for you?

Any questions please reach out, I am here to help

[email protected]

Please note: We cannot guarantee or assure any specific outcomes or monetary gains from our ideas, information, tools, or strategies. However, we do guarantee your satisfaction with our training. If, within 7 days, you are dissatisfied with the quality of our training for any reason, you can request a full refund. It's important to understand that all of our company's products and services are intended solely for educational and informational purposes. None of the information provided on this page, our websites, or in our content or curriculum should be interpreted as a promise or guarantee of results or future earnings. We do not provide legal, medical, tax, or any other professional advice. Any financial figures mentioned here or on our websites are used to illustrate concepts and should not be considered as typical or exact earnings, nor should they be seen as promises of actual or future performance. Exercise caution and always seek guidance from your accountant, lawyer, or professional advisor before taking any action based on this or any information related to lifestyle changes, business, or finances. Ultimately, you are solely responsible for your decisions, actions, and outcomes in life. By registering here, you agree not to hold us liable for any decisions, actions, or results under any circumstances or at any time.